Quartz stone is an environmentally friendly building decoration stone. Everyone is familiar with it. At present, quartz stone is widely used in cabinet countertops, test benches and window sills. It has to be said that cabinet countertops have become synonymous with quartz stone. Many people would say that quartz stone is exclusive to the countertop. This is wrong. Quartz stone was first used in countertops because domestic quartz stone manufacturers had limited production technology and capacity, and most of them depended on imports, which led to the high price of quartz stones, so that ordinary income families could only choose to apply to cabinets with relatively high countertop requirements.
Artificial Calacatta Quartz Countertops
Artificial Calacatta Quartz Countertops
With the improvement of production technology and capability of White Quartz Countertops Supplier in my country, quartz stone has been fully applied in the overall home improvement. Due to the extremely low water absorption rate of quartz stone, the surface is difficult to paste, and when traditional cement mortar is used for bonding and laying, if it is not handled properly, water spots and discoloration are likely to occur, resulting in more hollowing, cracking, shedding, bulging, etc. than natural stone. Various problems.
Quartz Engineered Stone Slabs are used in more and more places on the ground. In order to avoid the appearance of various adverse phenomena, the choice of materials is particularly important. The thickness of the quartz stone should be more than 20mm. When purchasing, it should be used with the quartz stone manufacturer to explain the ground use, because the formula of the quartz stone floor tile is different from other applications. The adhesive should be abandoned using traditional cement paste, and special glue powder should be used. Due to the smooth surface of the quartz stone, it must be separated from the adhesive at the later stage, and the adhesive should be brushed before paving.
1. Stir the rubber powder. The ratio of rubber powder to water should be 1 part of water and 4 parts of dry powder. The ratio of powder to water can be appropriately changed according to construction habits to adjust the thin consistency. Use a low speed (300r/min) electric stirrer to mix evenly without raw flour.
2. Adhesive, brush the adhesive 2 hours before the board is used. The adhesive must be completely transparent before use.
3. After paving, confirm that there is no clear water or dust on the base surface, scrape the quartz stone adhesive (strip shape / full batch scraping) with a thickness of 7mm-15mm or more, and the same method on the back of the stone, the thickness is 2-3mm, then paste the quartz stone and use The rubber mallet is lightly tapped, so that the newly-attached quartz stone can completely adhere to the adhesive. Then correct the seam between the horizontal and the adjacent board, and pay attention to the seam between the stone and 3mm or more.
Our company also has Artificial Calacatta Quartz Countertops for sale, please contact us.
